Close
Du har ingen varer i handlekurven.
Søk

MARKBASS LITTLE MARK TUBE

Produsent: Markbass
SKU: 6035595
kr 8 135,00
Ikke på lager Ta kontakt med kundesupport for leveringstid
Tilgjengelighet: På lager
+ -
Markbass Little Mark Tube
The Little Mark Tube gives the warmth and richness of a tube preamp, 
or the clean attack of a solid state preamp
or a mix of both! On the front panel there are also two inputs with 
separate gain controls: one 1/4 jack, and one combo jack that accepts 
either a XLR or 1/4 cable. Additional features include switchable 
48V phantom power for the XLR input, solid-state/tube mix control, 
four bands of equalization, VLE and VPF filters, 
line out level control, pre-post EQ switch for the XLR out (on rear panel), 
and mute control (push-pull on the master knob).

INPUTS
INPUT 1: impedance 500 Kohm, max. voltage 15 Vpp
INPUT 2: (Balanced XLR/1/4" combo)
BALANCED: impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V
EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp

CONTROLS
GAIN 1: -60 dB to +23 dB range
GAIN 2: -60 dB to +23 dB range
MIX: mixes tube and solid state gain
MASTER VOLUME 
LINE OUT LEVEL 
GROUND LIFT (switch on rear panel)
PRE/POST EQ  (switch on rear panel)
MUTE (push/pull on master knob)

EQUALIZATION
LOW: center frequency 40 Hz; level: ±16 dB
LOW MID: center frequency 360 Hz, level: ±16 dB
HIGH MID: center frequency 800 Hz, level: ±16 dB
HIGH: center frequency 10 kHz, level: ±16 dB
VPF (Variable Pre-shape Filter) center frequency 380 Hz 
VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz 

OUTPUTS
LINE OUT: balanced XLR, max. voltage 20 Vpp
EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT: unbalanced, max. voltage 2 Vpp
SPEAKER OUT: speakon/1/4" combo, 1/4"

OTHER
WEIGHT: 5.07 lbs / 2.3 Kg
WIDTH: 10.87 in. / 27.6 cm
DEPTH: 9.84 in. / 25 cm
HEIGHT: 3.27 in. / 8.3 cm
OUTPUT POWER: 500W RMS @ 4 ohms / 300W RMS @ 8 ohms
POWER REQUIREMENT: 100/120V; 230V; 240V - 50/60Hz (Voltage is factory preset according to region of sale)

Minimum ohm load for all Markbass heads is 4 ohms.
Markbass amps/combos are manufactured to be sold and used in the country of purchase, 
and they are factory preset to that countrys voltage. Due to homologation issues, 
the voltage may not be changed.Rack ears do not come included with this head.
Product specifications are subject to change without notice.