Close
Søke

Earthworks ZDT 1024

Produsent: EARTHWORKS
SKU: 706233
kr 43 495,00 inkl MVA
Fire kanals ultra-ren preamp med Zero Distortion Technology
0 Nettlager inkl. Butikker
Leverandørlager - Ukjent status
+ -
The ZDT Zero Distortion Preamplifier™ series is based on discrete circuitry designed by David Blackmer, establishing a new standard of sonic excellence in electronics. This exacting new standard provides frequency response from 1Hz to 200kHz +0.5dB, a rise time of 0.27 microseconds and distortion of less than 1 part per million (0.0001%), eliminating all possibility of sonic degradation. These preamps are so fast, so clean and so transparent that you don’t even know they are there. It is like plugging your microphone into a “piece of wire with gain”. You will hear clarity and detail with the ZDT preamps that is not available in any other preamp at any price.

Features:

Zero Distortion – less than one part per million
High output level +30dBu
Very low output impedance will drive long lines without interference or signal loss
True 48 volt phantom, polarity reverse & clip indicator
Separate XLR & 1/4” Phone (t-r-s) outputs, each with its own gain/level controls
1/4” phone connector output will drive balanced or unbalanced inputs
Full differential (balanced) from XLR in to XLR out – no internal conversion to single-ended
All discrete components; Class A amplification (no ICs in the signal path)
Greater transparency with minimum signal path and minimum features


Specifications

Preamp Type: Solid State
Number of Channels: 4
Frequency Response: 2Hz to 100kHz ±0.1dB, 1Hz to 200kHz ±0.5dB
Impulse Response: 1.4µs
Distortion: XLR out: less than 1ppm (0.0001%); 1/4” out: 0.001%
Input Noise: 1.6nVHz½ at 20dB gain; 0.6nV/Hz½ at 60dB gain
EIN: -132dBV at 20dB gain; -143dBV at 60dB gain
Slew Rate: 22V/µs
Output DC Offset: ±1 mV typical, servo balanced
Power Requirement: 200-240V
Input: 4 XLR Female balanced transformerless
Input Impedance: 10KΩ phantom on, 100KΩ phantom off
Outputs: 4 XLR Male balanced transformerless (stepped)
4 ¼” TRS XLR Fem. balanced transformerless (variable)
Dimensions: 1 rack space 1.75” x 19” x 10.375”
Weight: 6 lb. (2.7kg)